Ghost Immobiliser Fitting
Protect your vehicle from theft of keys hacking, cloning and theft by using the world's first aftermarket CAN immobiliser. The Ghost app and GPS tracking can be connected to the immobiliser, which will send you alerts when your car is taken or damaged.
The installation of the Ghost immobiliser can be done by a certified technician. The right tools, insulation tape and heat shrink tubing are essential.
Getting Started
In contrast to physical security devices like wheel locks and car alarms, ghost immobilisers protect your vehicle without the use of LEDs or key fobs. They connect directly to the ECU CAN data network, and can only be activated after entering a PIN code. This gives a greater level of protection against key hacking, ECU swapping and cloning.
In the end, installing a ghost immobiliser Birmingham has to be done with great speed and accuracy. It can be a bit like navigating a minefield; one misstep can cause serious damage to the circuits of the electrical system of your vehicle. It is important to understand the procedure for installing and prepare your vehicle correctly.
First, you need to prepare the vehicle by taking out interior panels to allow for the immobiliser device. Once you've located the perfect location to hide it, secure it in place by using cable ties to stop it from being taken away or altered. Clean your wiring by connecting loose wires and using insulation tape to cover the exposed connections. This reduces the chance of a short circuit that is not intended to happen and improve the appearance and reducing the chance of theft.
Then, locate a source of constant 12V power as well as a grounding point for the ghost immobiliser. Once you've located these and tested the power wires using a multimeter to ensure they are delivering a consistent voltage. Connect the CAN H and the CAN L wires of your immobiliser with the power source and grounding points.
Once you've made all of the connections required It is important to check the connections and examine the immobiliser for signs of corrosion or other damage. By entering a PIN and then starting the car is a good way to test the system. This should be an integral part of your routine since it can help you detect any issues that might be intermittent early on. Regular testing will also help to improve the longevity of the device and ensure that it is running at its peak performance.
Preparing your vehicle
Installing a Ghost immobiliser is a process that requires knowledge and tools. A wiring diagram of the vehicle is crucial to identify the proper wires and making precise connections. A multimeter is a great tool to check electrical values and ensure safety. Insulation tape and cable ties can be used to guard the connections from damage and to ensure they are secured. A user's manual is available for the Ghost Immobiliser. It will provide you with specific instructions specifically tailored to the model.
Once installed, the ghost immobiliser will prevent unauthorised engine starts by requiring the owner to enter a unique code sequence using the buttons on the steering wheel or console. This can be accomplished manually or remotely through an app for mobile phones, and the code is able to be changed by the vehicle owner at anytime. The device is also silent and unnoticeable by thieves since it doesn't emit any radio frequency.
Ghost immobilisers connect directly to the vehicle's CAN bus, a network that communicates with all the vehicle's electronic control units (ECUs). It intercepts signals generated by the ECUs and stops the engine from running if a false signal is detected. The system is weatherproof and tamper-proof. It doesn't have any keys or LED indicators to draw thieves' attention.
It can be positioned behind the dashboard or in a discreet area, so that it isn't visible to thieves and doesn't hinder the vehicle's performance. It can be tucked away in a small container, so that it is less likely to be noticed by unscrupulous salespeople during a test-drive.
Its stealthy operation, along with its integration into the CAN-bus system of the vehicle, can be a powerful deterrent to modern car theft methods like signal relay attacks and key cloning. The system can be combined with other security measures to create a powerful barrier that can deter even the most obstinate thieves. Many insurance companies recommend or even require ghost immobilisers, as they can cut down on the cost of insurance.
Making similar webpage are completely silent unlike traditional security systems, which can be heard by thieves. They stop thieves from knowing that your car is on. They also block high-tech methods used to steal vehicles, such as OBD port hacking. Installing them without leaving permanent marks on your car is an excellent option for those who plan to sell the vehicle in the near-future.
The Autowatch Ghost 2 is a immobiliser for CANbus that is one of the most reliable and current solutions to stop car theft. It utilizes the CAN data network to deactivate your engine and generates a PIN code that only you know, which means it's difficult for criminals to detect. It can be used in many different vehicles, and it works with many features already installed like car alarms, steering wheel locks, GPS trackers and door lock bypass.
If you decide to install a Ghost immobiliser for your vehicle, make sure to consult the wiring schematic to identify the wires to connect. Check their locations to make sure they are accurate, and label them or tape them to help keep track of them. It is also necessary to locate a constant power source (12V) for the system as well as a grounding. Once you have these in place, you can start to connect the components to complete the installation.
When the ghost immobiliser is connected to your CAN bus, it will prevent your vehicle from starting unless you enter a pin number using the buttons on the dashboard or the steering wheel. This will stop ECU replication and other methods of stealing vehicles. It can also be used with other Thatcham approved security devices such as alarms and tyre clips to give your car an additional degree of security.
As the UK automotive industry continues to expand, so do the options available for securing your vehicle. With so many options for thieves to break in and steal your car it's essential to do everything you can to ensure it isn't stolen. Ghost immobilisers are a popular option among car owners who are responsible.
Testing the System
The Ghost Immobiliser uses a CAN data network to communicate with the vehicle's ECU, preventing the engine from running until a specific PIN code is entered. This makes it difficult for thieves copy your key fob to open your vehicle, and harder to disable the system by hacking its electronic.
Ghost Immobilisers can also be used in conjunction with GPS tracking devices to help you locate your vehicle if it's stolen. This isn't an everyday feature in aftermarket security solutions however it's a great option to increase your security and get peace of mind knowing that your vehicle is always secure.
The Ghost-II immobiliser not only provides enhanced security but also provides a more convenient experience for the user, by not having to use additional key fobs or devices. It features a simple, easy PIN code entry that integrates seamlessly with your daily routine. It also offers options for deactivation and features that allow you to temporarily disable the immobiliser to allow valet parking or for servicing.
Before beginning the installation process, familiarize yourself with the vehicle's wiring and prepare the necessary tools. A basic set of hand tools will allow you the flexibility to make precise connections, while a multimeter will help determine electrical values. Insulation tape and heat shrink tubing are crucial to protect connections from short circuits and cable ties can be used to secure the wiring in the right place. Lastly, it's important to work in a well-lit area and wear the appropriate safety equipment when working with electrical and tool components.
You should test the Ghost immobiliser after you have completed the installation to verify that it's working correctly. First, you should try to start the vehicle without entering the PIN code. If this doesn't work then you'll need to retest and inspect the connections more carefully.
Unlike other security systems, the Ghost Immobiliser is a covert device that cannot be detected by thieves and is much more effective than traditional physical deterrents such as wheel clamps or steering locks. It is TASSA acknowledged and approved by some insurance companies, which makes it a cost-effective investment that will give you the peace of mind you need.